3D | WIP | Impreza WRC '06

[buckas]

hey up chaps, next one coming your way :mrgreen:

started this yesterday with difficulty as i only have the front (http://www.swrt.com/cpimages/798229.jpg) and side (http://www.swrt.com/cpimages/798262.jpg) views to use for ref, the blueprints aren't out yet for the normal 06 road car, so no luck for the wrc one as it isn't going to be used till monte 06. a lot of guessing so far :/ - about 9/10 hours

http://img35.imageshack.us/img35/6434/wip7ds.jpg

thx :wink:

[Pod]

I hate you, and its only in the early stages :| seriously, nice one so far drew lad, keep at it XD

[SuhaiL]

even the early stages are beautiful
cnt wait to see it done bukars!

[Cooper]

:shock: Looking awesome so far! Can't wait for it to be finished ;)

[buckas]

thx chaps :D

[jokerman]

bitch :(

its fucking awesome

[Gary.]

I'm coming to wales soon, could i stop by for a quick lesson ? :lol:

[Luke]

lurvely so far :wink:

[buckas]

Could i stop by for a quick lesson ? :lol:

grab it by the hind legs, then chloroform on some old pants or t-shirt over her mouth, then sheer off the wool on the ars.............oh 3d :oops:

[robz]

how do you do it ? block modelling ? or another method ?

[buckas]

poly modelling, start with a 1x1 seg plane, move the verticies into place in all viewports, then shift drag edges away to add more segs

continue above until finished car :)

[robz]

poly modelling, start with a 1x1 seg plane, move the verticies into place in all viewports, then shift drag edges away to add more segs

continue above until finished car :)

woahhh slow it down .. im still a newb

vertices into place in viewports? :shock:

[Sonny]

Going to do another animation? :D

[Mark.]

Mr Showoff :P

I'm gonna have to get back into 3Ds max, the last peice was my Ibanez guitar, might re-do it :D

[buckas]

poly modelling, start with a 1x1 seg plane, move the verticies into place in all viewports, then shift drag edges away to add more segs

continue above until finished car :)

woahhh slow it down .. im still a newb

vertices into place in viewports? :shock:

learn this and memorize it :D > http://67.15.36.49/team/Tutorials/fiat500/fiat500.asp

[ESC]

Hi Buckas,

damn you are the 3d-master dude :)
i really love it, nice lines, i tried it once but i cant do it :(
can you pm me your first 3d-car?

Greeting,

ESC

[robz]

cheers dude, ill have a go at that, learning skeletons and the basics of lipsync on my course at the moment.. maya is too different to max, have to work out all the equivelants :lol: :lol:

[graymathie]

aw lookin good so far buckas, so you just using images as your base?
And thanks for that link, really helpful, looks much easier than some of the programs ive used in the past. I think i'll need to get my copy of 3Ds Maz back on the go, the tut makes it look reasoably easy to understand, thanks.

[buckas]

ive got maya, but it looks nuts - think i'll stick to what i know until i get bored :lol:

got max 8 now(not installed), waiting for VRay 1.5 to come out 8)

can you pm me your first 3d-car?

Greeting,

ESC

first completed car was the pug 206, and no-ones having that sry :)

[graymathie]

drew quick question, is 3ds max made by autodesk?
website www.autodesk.com

[buckas]

yeh, autodesk bought out discreet

but it's still the same site, www.discreet.com :)

[graymathie]

ahrite cool cheers, my cousin has 3DS max 8? he said he'd let me borrow it, then if i like it i can go out and buy it...obviously :wink:
You better be ready to provide me with your expertise in the next couple of days lol

[buckas]

buy it? :P

you got 3.5k spare? 8)

[robz]

this is more bloody complicated than i thought :cry:

[graymathie]

buy it? :P

you got 3.5k spare? 8)

well for the purpose of not getting banned im going to buy it...if you know what i mean? :wink:

Should hopefully be gettin it from my "cousin" by early tomorrow morning. :lol:

[buckas]

8)

[F-16]

you're so talentful doing these 3d :shock: I love it

[buckas]

:mrgreen:

12 hours, done the scoop :lol: + air intake

http://img324.imageshack.us/img324/1403/wip26fo.jpg

:)

[robz]

lookin better... you have a lot of patience!

[buckas]

thx man, hehe - got to have in this game :mrgreen:

[graymathie]

was that 12 hours to do the scoop, or 12 hours up until the stage of where you are now?

[buckas]

10 ish up to first wip pics - and extra 1 and a half ish to do the scoop and intake + other tweaks of the mesh you can't really see :)

[Jacob]

It took you nearly 2 hours to do me. 8)

:|

:oops:

[Reload]

looking great mate, i love all your 3d work.

[buckas]

thx v.much matey :)

It took you nearly 2 hours to do me. 8)

:|

:oops:

ROFLPMSL

Well you wouldn't put the tripod down :lol:

[Jacob]

£7.99 at Jessops mate.

Can't argue.

Got some 2500+ b8erez and a 1 hour charger too. :P

[buckas]

wooooooooooooo

nice one 8)

[Jacob]

*Thinks about the telephoto lens*

:twisted:

Anything else I might need?

Sexual 3d ness btw. :D

[buckas]

:wink:

i've always wanted the wide angle + telephoto beasties :cry:

[David]

Fucking bastard :lol:

Looking nice drew. will look mint finished :P

[vässmar]

Looks sweet so far Buckas! I really have to get started again with 3ds, but I don't really have the patience so everything I do only gets like half finished... But it's great fun anyway :D
Can't wait to see this one finished. Keep it up :wink:

PS. Check your PM.

[Rick]

w000, another bucksie project! cant wait to see the result man :D

[RBH]

You are really good at this m8!

Keep on going!

Greetz, RBH

[megbleu]

very nice. keep on going, uhm just asking but, do you make half the front and then copy it, and past it on the other side?

SuCc3s!!!11

[PRIdE]

i hate you bucky :(

[Banshee]

very nice. keep on going, uhm just asking but, do you make half the front and then copy it, and past it on the other side?

SuCc3s!!!11


Aye, he mirrors it..

[Edvard]

Nice Drew, so you got yourselves a Spam topic :lol:

j/k :P


Looking Damn nice atm, I whis i coud do such things whit 3dmax..
i just dont got the patient to do it :mrgreen:

[graymathie]

yeh well i got 3ds max this morning and its all working fine, but i kinda cant do anything.
that tutorial you posted earlier doesn't really explain stuff well. firsty i dont know how to create a plane properly or how to adjust the size of the plain like it says in the first step of modelling the exterior. any help would be much appreciated.

cheers,
Gray

[DAMN DESIGNS]

wow that looks great
i cant wait to se this as im a huge scooby fan

[jackstrath]

looking gd !! im not to sure on the new scooby coz of the main fact it looks like a seat at the frount but it looks ace man !!!. keep it up !!

[Josh]

Looks awesome so far mate, keep it up.

[graymathie]

i hate this program, i cant do anything!
got a blue print set up etc but nothings working, im following the tutorial exactly but it never works, ive never actually been this close to crying :(
ive spent 6 hours lookin at the same crappy blue print having to reset every 2 minutes cos nothing is working!!

[buckas]

19 hours now lads,

http://img116.imageshack.us/img116/7172/wip36pl.jpg

that spoiler done my nut in. done now though *phew* :mrgreen:

[Pod]

:shock: proper brilliant i tell the 8)

[Nick Hughes]

Holy - Bleep. Drew, you've done it again.
How long did it take you to get this good? I've being following them tutorials you sent me on msn, and i can just about make a wheel without- tyre, spokes etc. :P

[megbleu]

very nice. keep on going, uhm just asking but, do you make half the front and then copy it, and past it on the other side?

SuCc3s!!!11


Aye, he mirrors it..


the bnshy is back!


Nice update lad. 8) 8)

[Jesper]

Do I need much experience to do the tut you posted earlier in this thread?

[buckas]

nope, nothing - firrst thing i ever used :wink:

[Jesper]

nope, nothing - firrst thing i ever used :wink:

Whoh, then it just to start then :)

Thanks for the (quick) answer.

[DAMN DESIGNS]

wow
its lookign great
catch me on msn i just got 3ds max and i need to ask youo something

[robz]

i hate this program, i cant do anything!
got a blue print set up etc but nothings working, im following the tutorial exactly but it never works, ive never actually been this close to crying :(
ive spent 6 hours lookin at the same crappy blue print having to reset every 2 minutes cos nothing is working!!

dont try to make a car first... make basic shapes

Drew : looking great now!

[AMV]

Sweet render, nice HDRI lightning. how long did it take to render?

[Paul FWx]

Buckas, your skills have improved to something id never see... i remember the days when i was the V-Mod Mod on Max Power..... Trully awesome fella!

[buckas]

cheers paul lad, still chopping matey? :mrgreen:

Sweet render, nice HDRI lightning. how long did it take to render?

about 30 seconds each pic dude :wink:

[F-16]

you must have a super mega giga hyper strong computer :shock: 30 sec :shock:

[buckas]

LOL!

not really, VRay + simple materials = low render times 8)

[Jacob]

Looks sooooo sexual mate.

Love it.

It's floating though!

:lol:

(Where's the other half? xD)

HAX

[Jake_9105]

lovley m8

keep it up drew

[DAMN DESIGNS]

Where's the other half?

well hell probably do one side and then duplicate it :roll:

[Rick]

Where's the other half?

well hell probably do one side and then duplicate it :roll:

yup...yup...


anyways : that wing is fucking great bucky! i love it man, will be your best work yet huh :wink:

[Jacob]

Where's the other half?

well hell probably do one side and then duplicate it :roll:

Lolzypops. I was joking. :P

I know he mirrors it once it's done as it cuts down work etc.

He's doing a black version for me too. It pwns.

[RBH]

W00t, that looks fantastic! :shock:

[Rick]

Where's the other half?

well hell probably do one side and then duplicate it :roll:

Lolzypops. I was joking. :P

I know he mirrors it once it's done as it cuts down work etc.

He's doing a black version for me too. It pwns.

and no pink for me :cry:

[Josh]

Update is looking look as always.

[DAMN DESIGNS]

Update is looking look as always.

:roll: :roll: :roll: :roll:

[Quicksilver]

Stop being so good, your making us all look bad

[buckas]

:lol:

well today, i done the headlight - and it's the biggest cunt ever, it's so complex to even think how to make it :evil: still needs some tweaking, mats included

close up pic of the "lens" aswell ( i almost cum when i saw that render :| )

http://img220.imageshack.us/img220/4836/wip46eh.jpg

[eggstar]

ahhhh wooo awwww that lens :shock: :shock:

*dies*

top job lad

[PRIdE]

BUCKAS YOU FUCKIN PRICK !! Give me those skillz :(:(:(:( Send them by email or postalorder... Or let Glacius Pigeon fly by at your house again, he still owes me that F.E.A.R. Game and the Lcd Screen from Viperkid, so ... :D very nice man, love that LENS Like OMG :shock: :shock:

[salvation]

OoooOOoooo

thats just top notch

[Ollie]

OMG!! The lens is awsome!! the hole car is!!! and youre basically doing it from youre head!! top lad!!

[buckas]

thx lads 8)

lmfao at your ava ollie :lol:

[Lynroy]

wow amazing... lol just like teach me or i will kill you hahahha lol yeah anyway mate that is sweet as :shock:

[Sean]

That is looking amazing. Will have to give it a go some time but probly wont have the patience. Fantastic.

[Ben.]

Looking pure sex. Can't wait to see this done. :D

Get's its first outing at Monte next year, you going this time drew?

Ben.

[sparks]

now make that in real life drew :P

[Nick Hughes]

:cry: :cry: :cry:
I want you're brain.
Awsome work mate.

[Gary.]

I'd usually take the piss with some kinda "your mother has a penis" or "Go shag a sheep" joke, but i'm afraid i'm too busy looking at that render !


Goodday sir :wink:

[Nick Hughes]

Drew my friend. Could you point me in the right direction for somt textures and tut's?

[DAMN DESIGNS]

thats asweosme
you have some qamazign talent

[A5H]

Why don't you just get off the internet son :(

[Luke]

:lol:

well today, i done the headlight - and it's the biggest cunt ever, it's so complex to even think how to make it :evil: still needs some tweaking, mats included

close up pic of the "lens" aswell ( i almost cum when i saw that render :| )

Image (http://img220.imageshack.us/img220/4836/wip46eh.jpg)

http://img362.imageshack.us/img362/6435/mast5tf.gif

[RBH]

Whooaaaa!! That lens! :shock:

Daaayuuum!

[Bubba.]

I can touch it!

[DAMN DESIGNS]

I can touch it!

do you mean can i

[PRIdE]

I can touch it!

do you mean can i

nah he would brake the lens :(

[Bubba.]

..With my ugly look.

[buckas]

thx guys, update laters :D

Get's its first outing at Monte next year, you going this time drew?

Ben.

LOL, nah - probs be doing finland or germany :D

Drew my friend. Could you point me in the right direction for somt textures and tut's?

Blueprints

suurland.com (http://www.suurland.com)

onnovanbraam.com (http://blueprints.onnovanbraam.com)

Tutorials

3dkingdom.org (http://www.3dkingdom.org/modules.php?op=modload&name=News&file=index&catid=&topic=9&allstories=1)

pixel2life (http://www.pixel2life.com/tutorials/3dsmax.php?tut=16)

3dtotal.com (http://67.15.36.49/ffa/tutorials/tutorialsmax.asp)

danielbuck.net (http://www.danielbuck.net/index.php?page=tutorials)

maxunderground.com (http://www.maxunderground.com/tutorials.html)

Why don't you just get off the internet son :(

make me :mrgreen:

[PRIdE]

thx guys, update laters :D

Get's its first outing at Monte next year, you going this time drew?

Ben.

LOL, nah - probs be doing finland or germany :D

Drew my friend. Could you point me in the right direction for somt textures and tut's?

Blueprints

suurland.com (http://www.suurland.com)

onnovanbraam.com (http://blueprints.onnovanbraam.com)

Tutorials

3dkingdom.org (http://www.3dkingdom.org/modules.php?op=modload&name=News&file=index&catid=&topic=9&allstories=1)

pixel2life (http://www.pixel2life.com/tutorials/3dsmax.php?tut=16)

3dtotal.com (http://67.15.36.49/ffa/tutorials/tutorialsmax.asp)

danielbuck.net (http://www.danielbuck.net/index.php?page=tutorials)

maxunderground.com (http://www.maxunderground.com/tutorials.html)

Why don't you just get off the internet son :(

make me :mrgreen:

*Searches Buckas ip*
*Searches Ip spammer*
*logs in*
* ERR0R*

*CRAP !!*

[RBH]

Uhm, Drew, I have a question, which programd you use? Because I have Rhino 3D and I really want to make it to.. ;)

Thnx in advanced...

Greetz, RBH

[PRIdE]

Uhm, Drew, I have a question, which programd you use? Because I have Rhino 3D and I really want to make it to.. ;)

Thnx in advanced...

Greetz, RBH

i believe that is 3DSMAX

[buckas]

yah, 3ds max

any version is fine. all the same - im working on v.6, but have got v.8 now ready to install when the new VRay comes out :)

[RBH]

Hmm, ah 3DS Max.. I've got v4.0.. Is that one also good?

Greetz, RBH

[buckas]

get 6 minimum - that's when they redone it and added the better functions + rendering stuff etc :)

[Murray]

I would love to comment on this... but i'm speechless :shock:

I did a little 3D Max at college, so i know how much time, effort and skill has gone into this.

You've also inspired me to do some more 3d modeling :)

Beautiful work
Well done.

[RBH]

get 6 minimum - that's when they redone it and added the better functions + rendering stuff etc :)

Okay, thnx for the info! :)

Greetz, RBH

[DAMN DESIGNS]

go on msn please buckas

[buckas]

update lads, must be about 32 hours now - done the rear lights (complex as fuck :evil: ) also split up the panels

http://img67.imageshack.us/img67/3535/wip56io.jpg

[RBH]

Damn! :shock:

That is so fucking awsome! :shock:

Still love it! :D

Greetz, RBH

[David]

Get your 3D's in a game :P

Get to ride drews c....... :oops: :lol:

Looking mint dude, you gonna mod this one like the pug after its complete?

[Cooper]

That reear light is sexual! :shock:

[buckas]

thx guys 8)

Get to ride drews c....... :oops: :lol:

..itroen xsara :lol:

Looking mint dude, you gonna mod this one like the pug after its complete?

yeh most probs dude, probs be black again with some cf here and there :mrgreen:

[-NEO-]

love the whole 3d render!! great lights!

[buckas]

thx man, still a long way to go *sleepy smilie*

[Nick Hughes]

I've came!

AWSOME!

[graymathie]

I just think you do it for the attention lol,
makes you feel good.
Seriosuly though still lookin real good well done, the lights and lamps are sexual.

I've given up on 3DS Max...again i jsut cant do it!!!

[buckas]

lol, thx dude

i do it to challenge for myself, see what i can do + without challenging, there isn't progression

:)

[graymathie]

well i thought id do it for a challenge but when nothing worked etc etc etc i got fed up, i actually spent about 8 hours trying to get the thing to create the first polygon!

[TutChez]

:shock:
awesome!

:shock:
that rear light :shock: :shock:
omg, i've got a bit experience with max, tried to do an audi TT but stopped as it got boring, but if i even TRIED to make a rear light such as yours, im sure my pc would stop working... how many polygons is that? :o

[Ben.]

Still awesome! :D

CAn you please please make a 206 esque video of the car on the stage? I know it will take longer but i'll have your babies. :oops:

[slamskate]

it is soo amazing... that light is just :shock:

[buckas]

thanks v.much guys

:lol: ben, i would lad but i've got other projects on the go aswell - need the comp

how many polygons is that? :o

1 light is just over 1000 polys, the whole car including everything is 10,401 polys :)

[Ollie]

thanks v.much guys

:lol: ben, i would lad but i've got other projects on the go aswell - need the comp

how many polygons is that? :o

1 light is just over 1000 polys, the whole car including everything is 10,401 polys :)

.. DO you draw each polygon???

[buckas]

yeh, basically

[Gaz-O]

:shock: :shock: :shock: :shock: :shock: :shock: !!!!

[David]

yeh, basically
Mental bastard

:lol:

[buckas]

LOL, aye :lol:

here y'are, screenshot

http://img57.imageshack.us/img57/3283/sffff7uu.jpg

Was all started from one 4 vertexed poly on the front wheel arch, then shift drag edges out to make another poly, then select the verticies of them and move them around in each viewport to match the car lines. then chamfer the edges where you want it sharp, render it, undo it if it's fucked up and then redo it until correct - fook loads more to do aswell. i've split the doors up now aswell as made the window surround - only rear + front window surround + windows to do, then i'll mirror it over and start on the interior. then after that, it's decal time 8)

[DAMN DESIGNS]

looks great
i have just stated an audi tt (look out for it)
do you recommend new planes for each part or just strest the same one along
also can you recommend any other good cars to start with
ones that are really staight lines and easy

[buckas]

make it all as one, but to suit the lines and edges of the panels - then chop it up after

straight lines and easy......hmmm.......maybe the old golf's/vw's in general :)

[DAMN DESIGNS]

make it all as one, but to suit the lines and edges of the panels - then chop it up after

straight lines and easy......hmmm.......maybe the old golf's/vw's in general :)

so if i make it one i just ocnvert to editable mesh and chnage the edges, vortex, faces etc??

[buckas]

follow that fiat 500 tut on 3dtotal dude, honestly tells you everything :)

[kev.skyline]

your one mental bastard! i wouldnt have the patience at all for that :shock:

[buckas]

i love it, LOL :D

done the window surrounds + glass now, also choped the doors, rear bumper, boot out

http://img417.imageshack.us/img417/5092/wip65rl.jpg

pretty much ready for mirror'ing now - job for 2moz 8)

[Tony Riley]

Sweet Mary and Joseph.... :shock:

Looking forward to seeing what comes out
of this. As usual *duh* . :roll: :P

[salvation]

are you going to do the interior?

[buckas]

thx guys

yeh, making everything :)

[salvation]

Your just crazy! well its good for your portfolio are you doing it for the sake of it?

[markriccioni]

Buckas i keep asking, but where the hell do you find the time man?

[buckas]

hehe, no job at the mo - doing bits + bobs freelance etc, but most of the time just get my head down and do my own project :)

cheeky bit of mirror action now :mrgreen:

http://img138.imageshack.us/img138/3334/wip73iu.jpg

[robz]

dont shoot me but.. are you gonna do an evo to compete with it ? :lol:

*Shoots robz*

:lol:
Are you going to do the rally vinyls! ?

[buckas]

no evo and yes to the decals :)

[Jacob]

#I'm loving it#

:D

Yeah he's doing the vinyls.

Also teh black version for moi. 8)

Edit - Meh, quick poster. :P

[birdiemtfc]

Thats looking great mate. Can't believe how good you are at it :shock: :lol: Keep it up it will be amasing for sure.

[Rick]

its getting better each update, omg :shock:

[MrMan]

its getting better each update, omg :shock:

Tut foreigners.... It wouldnt be much good if it got worse would it!

Very nice work buckas final version should be stunning by the looks of it

[DAMN DESIGNS]

follow that fiat 500 tut on 3dtotal dude, honestly tells you everything :)

thanks dude i am


latest update looks gorgeous

[Ollie]

Looking Ace.. Cant wait to see the black Version.. With Road Rims i hope :oops:

[Jacob]

The rims are what I come over. Just wait. :P

[Gary.]

Looks awesome, really. Do a tuned version like your Pug !

[jokerman]

your doing a wide vertion with cheeky splitters and konig rims right?

[buckas]

deffo doing a tuned version after the proper wrc one

well, most of today spent doing the wheels/tyres - thx

http://img113.imageshack.us/img113/2537/wip82cu.jpg

:mrgreen:

[Jacob]

Looks nice mate!

Needs a big rally popping exhaust now. :P

[Ollie]

NOOOO Gold Rims!!!! "BLASPHAMY!!"

Lol I'm joking!! looking Mint now!!

[Sean]

I am amazed. It looks brilliant.

[jokerman]

Z0mg orgasm

the road going impreza has 5 holes in its wheels, does the WRC really have only 4?

looking great but you should work faster




so I can see it finished :wink:

[salvation]

its getting better each update, omg :shock:

that statement is still rellevent

I think he's intentionally making it better with each update :lol:

[buckas]

thx lads :mrgreen:

the road going impreza has 5 holes in its wheels, does the WRC really have only 4?

wrc one has 4 dude, no idea why. probs quicker to get them off at service :lol:

http://img138.imageshack.us/img138/4920/7981986pn.jpg

[F-16]

It looks nice will you put a bg ?

[Lynroy]

holly jesus..... that is getting hotter and hotter mate... keep it up ay, lol

[fujiwara]

you've inspired me into 3d again...i hate you for that :lol:

[Rick]

woa, the mirrored one is nice! rims look abit shabby, but knowing you, they will be as good as the rest :wink:

[RBH]

WOW! :shock:

Love to see the end result! :D

Greetz, RBH

[Gary.]

One thing i'd suggest is to make the rims larger or the car lower. It looks too tame to be a full on rally car. Either that or it's too skinny.

[nok]

damn you got skills mate! :o :)

[DAMN DESIGNS]

jumping jahosephas
thats great
would liek to see it on the sam stage as the peogut (sp)

also how about making a street race between the modded 206 you did ad a modded on of these

*waits anxiuosly*

[Philip]

Thats ace matey, lights are immense!!

Why are you so talented :cry:

[Nick Hughes]

Sweet, Nice one. Greate result.

[dandadude]

Buckas I have had a look through the rest of the thread and i see you said you got version8 of 3ds max but your waiting for the newest version of vray until you install it, im not that up on 3d modeling and i was wondering do you have to have a certain version of vray to go with 3ds max 8 or can u use older versions of vray.
p.s
scooby is looking great and cheers for any help. :)

[buckas]

probs can use older versions, but i like updating things together, lol

finally had a chance to continue it today 8)

meshed the grille and bonnet vent, made all of the intercooler bits, close the arches, some other tweaks, made the front splitter (gives it a much better appearance imho)

http://img122.imageshack.us/img122/6076/wip91zf.jpg

thx :)

[salvation]

:shock: cunning stunt

[David]

:shock:

Fecking sexy dude. Hope your pc blows up :twisted:

:lol:

But seriously, very sexey

[Tom]

looks damn awesome, but in my opinion the roofline seems a little low?

[buckas]

thx guys :mrgreen:

yeh tom, i've thought that sometimes, but then from a different angle it looks allright and on the side view it's bang on, as christer put it "must be mind games" :lol:

[gsx4g63]

dude teach me how to do that NOW :shock:

THATS AMAZING

[Tom]

*shrugs*

your the boss, you tell me ;)

and when's the yaris render being done :P

[Sean]

Absolutly love it. Wish I could make something as beautiful as that. Looks fantastic.

[Rick]

oh YES, w00 :shock:
DAMN Drew, awsome stuff

[TwinTurbo]

damn, i want to get into 3d rendering now! looks sweet

[buckas]

:mrgreen:

[Gary.]

Rims still look too small/car too high !




Awesome though. Btw, i do realise it's a Rally Car - Just lower the fudger :mrgreen:

[Edvard]

Damn, Those lights are Amazing you sick ass mofo!!
:P

Loving the whole model so far

btw, how many hours have used on it so far?

:o :shock: :o :shock: :o :o :shock: :o

[buckas]

Rims still look too small/car too high !

Awesome though. Btw, i do realise it's a Rally Car - Just lower the fudger

LOL, kk - will lower it some more :mrgreen:

btw, how many hours have used on it so far?

hmm, must be around 55 ish :)

[C.M.]

:shock: that soo faking awesome :shock:

im lerning now in one of 3d proggrame but it's soo hard to do anythigh...i realy dont know how can you do that :shock:

nd

[Ollie]

OMG!!! thats pretty.. well.. VERY AWSOME!!.. now to take over the world.

[buckas]

I'm planning on it :lol:

http://www.ceat.okstate.edu/people/images/Dr%20evil%202.jpg

:oops:

[Edvard]

hmm, must be around 55 ish :)

:o
not that i doubted :lol:

[DAMN DESIGNS]

wow thata amzing
great work
keep it up

what program are u using to make that?

[DAMN DESIGNS]

what program are u using to make that?

3ds max and vray

[Pod]

I'm planning on it :lol:

Image (http://www.ceat.okstate.edu/people/images/Dr%20evil%202.jpg)

:oops:

LMFAO *i actually laughed :oops: *

[jokerman]

Rims still look too small/car too high !

Awesome though. Btw, i do realise it's a Rally Car - Just lower the fudger

LOL, kk - will lower it some more :mrgreen:

btw, how many hours have used on it so far?

hmm, must be around 55 ish :)

make it a tarmac rally car so its low and realistic

[buckas]

Aye it is the asphalt spec one, as the alloys are different :)

[jokerman]

STOP BEING SO GODDAMN SMART!

[buckas]

:P

[graymathie]

its come along very well buckas, i literally gave up at the first poly, everything was being a whore and i just thought i'll slowly turn my back and leave the room before i chuck my computer out the window!

wow you're good :shock:

im trying it too atm:P tried it before but didnt work out too well...
but i have a prob i think :x
it seems that my blueprints don't match... if i set a polygon exaclty right in the top view, it's way off in the other views... and i can shift the planes with the blueprints as a want, it doens't get right... i tried about 5 blueprints, all the same problem... i think it's something to do with max :S but i dunno what... :?

[buckas]

won't be a problem with max, the only problem is caused by the person using it, find some tuts then try it again

[A5H]

Penus. Use autostudio... :x

[buckas]

nope, 3ds max in my job :P :mrgreen:

[A5H]

nope, 3ds max in my job :P :mrgreen:

It was just a joke lad :(
You don't really have a job I'm afraid :cry:

[buckas]

i knows :lol:

I do have a job, start next monday and it is.............



.........3D Artist for a games company making cars for next gen consoles :mrgreen: :mrgreen: :mrgreen: :mrgreen:

[DAMN DESIGNS]

i knows :lol:

I do have a job, start next monday and it is.............



.........3D Artist for a games company making cars for next gen consoles :mrgreen: :mrgreen: :mrgreen: :mrgreen:

any more detials
mabye some companies or games??

[Pod]

i knows :lol:

I do have a job, start next monday and it is.............



.........3D Artist for a games company making cars for next gen consoles :mrgreen: :mrgreen: :mrgreen: :mrgreen:


Best job ever ? :| :(

Must be good to do something you love and like doing as a hobby.

[buckas]

any more detials
mabye some companies or games??

can't give much away, but the games are made by evolution studios and thq

[Littlewood]

any more detials
mabye some companies or games??

can't give much away, but the games are made by evolution studios and thq

Get our chops in some games lad :P.

[David]

any more detials
mabye some companies or games??

can't give much away, but the games are made by evolution studios and thq
meh? :lol:

[David]

meh? :lol:

http://www.maxpower.co.uk/forum/icon_smile_tapedshut.gif
Thats a yes then :mrgreen:

[Littlewood]

Get some Digimods kits rendered and available for purchase on the game.. That would rule :).

[buckas]

lol, nice idea - i think they might allready have the kits drawn up, to just make in 3d

Thats a yes then :mrgreen:

8)

[DAMN DESIGNS]

so were gonan be expecting some nice previews

mabye a demo of the game for the digimods comp prize sonner ready date??

anyway
get the hell back onto the scoob

[Dr.GoFast]

OOOO Cool

nice job ( working job ..lol....prezza is nice to )

make my C4 Tubular in3d PLEEZ


LOL just kidding ( i'm trying to do it myself now .....no luck yet .....but ill get there ...( little engine the could ....i think i can, i think i can, i think i can, i think i can, i think i can, )

[weeman]

i knows :lol:

I do have a job, start next monday and it is.............



.........3D Artist for a games company making cars for next gen consoles :mrgreen: :mrgreen: :mrgreen: :mrgreen:


Best job ever ? :| :(

Must be good to do something you love and like doing as a hobby.
my uncle and dad said when u start doing something u enjoy as a job, it loses its hobby-ness...ive never thought it to be true, but meh... how big is the file size or w/e for 3ds max buckas?? i may think bout getting it if it aint too big...

[buckas]

mini update :mrgreen:

done the door handles + mirrors now

just needs zorst, bonnet/boot clips, camera, aerials, interior then decals :)

http://img10.imageshack.us/img10/1456/wip314rz.jpg

http://img14.imageshack.us/img14/3053/wip321yl.jpg

[DAMN DESIGNS]

:shock:
wow
thats amazing
pure beauty

[buckas]

thx man :D


teh zorst 8)

http://img453.imageshack.us/img453/6231/wip333cn.jpg

[David]

Pwoar...

Looks brill mate. Stop being so damn good :lol:

[DAMN DESIGNS]

:o :shock:
how about a carbon spoiler and splitters for it??

[Gary.]

My fucking god.


I'll have your baaaaaaaaaahhbies.

[Nick Hughes]

Nice!!!
I still don't understand why your so good and i suck ass.

[Gary.]

Nice!!!
I still don't understand why your so good and i suck ass.


It's called life.

[salvation]

:shock: speachless

[Ollie]

OMG!!! Hehe you so ahve to slip one of youre models into Juiced 2 as a *hidden secret*

[MrMan]

Nice!!!
I still don't understand why your so good and i suck ass.


It's called life.

http://norcal3.com/owned/diver-owned.jpg

[Philip]

Nice!!!
I still don't understand why your so good and i suck ass.


It's called life.

Image (http://norcal3.com/owned/diver-owned.jpg)

LMFAO, that funny

Amazing work mate, love it!!! :shock: :shock:

[buckas]

hehe thx lads, :lol: @ that diving board pic

:o :shock:
how about a carbon spoiler and splitters for it??

yeh fo'sho, once i've done the interior, i'll start doing the decals and that includes finalising the materials aswell, the spoiler will be half cf, half blue paint like it is on the real one, then cf front splitter and also wing mirrors 8)

[ Added: 2005-11-18, 16:57 ]
My fucking god.


I'll have your baaaaaaaaaahhbies.

ROFL :lol:

[DAMN DESIGNS]

hehe thx lads, :lol: @ that diving board pic

:o :shock:
how about a carbon spoiler and splitters for it??

yeh fo'sho, once i've done the interior, i'll start doing the decals and that includes finalising the materials aswell, the spoiler will be half cf, half blue paint like it is on the real one, then cf front splitter and also wing mirrors 8)



great
will there be a track slag version too

[buckas]

perhaps :lol:

done the rollcage, aerials and roof camera now - about 61 hours

http://img509.imageshack.us/img509/5264/wip119eu.jpg

rendertime for each pic between 2 and 3 minutes :mrgreen:

[David]

:shock:

[Edvard]

So shiny :shock:
that exhaust :o
Those rearlights :o
Those headlights :o
The rollcage :o

The CAR :shock: :o :o :shock: :o :shock: :o


DAMN YOU!! :twisted:

[jokerman]

:shock: dahahamn

[salvation]

looks like it should be on the xbox360 :mrgreen:

[PRIdE]

Sweet, now make some dust spots !

http://www.blissdd.com/WRX/Tutorial/images/WRX_Test_Lg.jpg

[Rick]

awsome bucksie :shock:

now add me on msn! you forgot, you liar! :lol:

[RBH]

Wooow... :shock:

Absolutely great! :D

Greetz, RBH

[Nick Hughes]

Very nice drew, can't wait till the full version is completed.

[alien.46.uk]

U usin 3DS, ive been tryin to larn for ages, i just cant get a grasp, lol, ive built some planes, but not that good, tried cars, way to hard, i gave up on it, lol....


VERY VERY VERY Nice Work!


Wish i could get that good :D .

[megbleu]

:shock: shower.. :lol: great work

[hugosilva]

damn :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: :shock: awesome ,im speachless

[MrMan]

Like pride said you need to throw some mud on it! its disturbingly clean! make me want to throw dust at it! fuck all them other versions! go all out and make a cusco version! Teh Bollox!?

[//aza.]

Very Shagerdelic!!!

Any Updates Drew?

[buckas]

Lol, sorry lads - i'd love to get on with it but work has got in the way (how dare it! :lol: )

will be an update soon, promise :mrgreen:

[dopeshopper]

looks great :shock: :shock: :shock: :shock: :shock: love your work, cant wait to see it finished!

[buckas]

lol, thx dude - finished here :)

http://digimods.e-visionit.co.uk/viewtopic.php?t=2477&start=0